Гидроаккумулятор: ABSBG-2X/B10,0N-EAC /20M330 V/A6M DC

---Гидроаккумулятор: ABSBG-2X/B10,0N-EAC /20M330 V/A6M DC

Артикул: R901488474

Гидроаккумулятор: ABSBG-2X/B10,0N-EAC /20M330 V/A6M DC Арт. R901488474

Component series 2X
With bladder-type accumulator according to data sheet 50171

Наши менеджеры обязательно свяжутся с вами и уточнят условия заказа

Код

Ordering code

01		02		03	04	05		06		07	08	09	10	11		12	13	14	15
ABSBG	-	2X	/	B		N	‒		/				G24	V	/		6

01	Accumulator station	ABSBG
02	Component series 20 ... 29 (20 ... 29: unchanged installation and connection dimensions)	2X
Hydraulic accumulator
03	Design
03	Bladder-type accumulator according to data sheet 50170	B
Accumulator volume in l
04	Bladder-type accumulators
	1,0 l	1,0
	2,5 l	2,5
	4,0 l	4,0
	6,0 l	6,0
	10 l	10
	20 l	20
	24 l	24
	32 l	32
	50 l	50
Bladder material
05	e.g. Acrylonitrile-butadiene rubber (NBR)	N
Country acceptance for hydraulic accumulator
06	Short symbol for country acceptance in Europe, Russia and China from the manufacturer's type key
	Acceptance according to 2014/68/EU by DC	CE
	Acceptance according to SELO (China)	534
	Acceptance according to EAC (Russia)	EAC
	Operating instructions	BA
Accumulator shut-off block according to data sheet 50131
07	ABZSS 10 pressure relief valve 6E	10
	ABZSS 20 pressure relief valve 10E	20
	ABZSS 30 pressure relief valve 20E	30
	ABZSS 30 SO30 pressure relief valve 30E	31
Accumulator shut-off block ‒ Unloading
08	manual and electro-magnetic	E
08	manual	M
Accumulator shut-off block ‒ Set pressure at the pressure relief valve
09	100 bar	100
	140 bar	140
	210 bar	210
	315 bar	315
	330 bar	330
Accumulator shut-off block ‒ Voltage type
10	Direct voltage 24 V	G24
Accumulator shut-off block ‒ Seal material
11	FKM	V
Mounting construction kit
12	Mounting with assembly kit A according to DCCS 10060 (console C)	A
12	Mounting with clamp according to DCCS 10060	B
ABZMM pressure gauge according to data sheet 50205
13	DN63	6
Pressure gauge scale
14	bar/MPa	M
14	bar/psi	P
Accumulator manufacturer
15	Bosch Rexroth	DC
15	Roth Hydraulics	RH

Order example:
ABSBG-2X/B32,0N-CE/30E315G24V/A6MDC

Технические данные

Accumulators

Design			Bladder-type accumulators
Installation position			Any, preferably with the fluid connection socket at the bottom
Ambient temperature range		°C	-15 … +65
Line connection			Screw-in thread
Hydraulic fluid ¹⁾			Hydraulic oil according to DIN 51524
Hydraulic fluid temperature range	NBR bladder	°C	-15 … +80 ²⁾
Hydraulic fluid temperature range	ECO bladder	°C	-32 … +80
Acceptance specifications	CE/BA		Acceptance according to 2014/68/EU or the operating instructions
	China		SELO
	Russia		EAC

¹⁾	Other hydraulic fluids upon request.
²⁾	Others upon request.

hydraulic, bladder-type accumulator

Nominal capacity	V_Nenn	l	1	2.5	4	10	20	24	32	50
Effective gas volume	V_eff	l	1	2.4	3.7	9.2	18.1	24.5	33.4	48.7
Maximum admissible flow	q_max	l/min	240	450		900
Maximum admissible operating pressure	p_max	bar	350			330
Maximum admissible pressure fluctuation range	Δp_dyn	bar	200			125

pneumatic

Charging gas				Nitrogen, cleanliness class 4.0, N₂ = 99.99 vol. %
Gas filling pressure	CE, BA, EAC	p₀	bar	0
Gas filling pressure	CN	p₀	bar	2 … 5

Shut-off block

Seal material		FKM seals (NBR seals on request)
Operating temperature range	°C	-15 … +80
Maximum operating pressure	bar	350
Block material		Steel
Pressure relief valve, direct controlled		DBDS…K1X/…VB or DBDS…K1X/…E according to data sheet 25402
Cartridge seat valve		KSDER1PB/HN9V according to data sheet 18136-20
Protection class according to VDE 0470-1 ‒ version "K4" (DIN EN 60529) DIN 40050-9 ¹⁾		IP65
Voltage type ²⁾	V	24
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c)		Class 20/18/15

¹⁾	With mating connector mounted and locked
²⁾	In case of electro-magnetic unloading "E"

Hydraulic fluids		Classification	Suitable sealing materials	Standards
Mineral oil		HL, HLP	NBR, FKM	DIN 51524
Fast bio-degradable hydraulic fluids	Insoluble in water	HETG	NBR, FKM	VDMA 24568
	Insoluble in water	HEES	FKM	VDMA 24568
	Soluble in water	HEPG	FKM	VDMA 24568

	Important information on hydraulic fluids!
	For further information and data on the use of other hydraulic fluids, please refer to data sheet 90220 or contact us!
	There may be limitations regarding the technical valve data (temperature, pressure range, life cycle, maintenance intervals, etc.)!
	The flash point of the hydraulic fluid used must be 40 K higher than the maximum solenoid surface temperature.
	Flame-resistant – containing water: Maximum pressure differential per control edge 50 bar. Pressure pre-loading at the tank port > 20 % of the pressure differential; otherwise, increased cavitation. The pressure peaks should not exceed the maximum operating pressures!
	Bio-degradable: When using bio-degradable hydraulic fluids that are zinc-solving, zinc may accumulate in the fluid (700 mg zinc per pole tube).

Pressure gauge

Size	bar	63
Pressure gauge		Glycerin
Double scale		bar/MPa

Surface treatment:

All steel components and components without protective coating are coated prior to installation (minimum corrosion protection time of 12 h in salt spray test). Then, the devices, components and the piping are installed. All components, assemblies, controls, pipes, fittings and standard parts keep the supplied surface protection and are not additionally coated. The corrosion protection is determined by the least protected element in the assembly.

Характеристики

Accumulator station with shut-off block
Bladder-type accumulators
Shut-off block with integrated shut-off valve, safety valve (type-examination tested) and drain valve
Drain valve can be operated manually or optionally electrically
Glycerin-filled pressure gauge with red indication of the maximum admissible operating pressure on the dial
Console for weld or screw connection
Assembly prepared for external equipotential bonding

Доставка и оплата

Доставка

Наша компания предлагает несколько вариантов доставки:

Доставка до склада Покупателя через Транспортную компанию: (Деловые Линии, ПЭК, Бакал-Сервис)
Курьерская доставка: (ТК СДЭК)
Самовывоз с нашего склада (г. Санкт-Петербург, ул. Глиняная д. 13 Литер КА) наличие товара уточняйте у менеджеров.

Оплата

Безналичный расчет (работаем только с юридическими лицами)

Оплата заказов юридическими лицами возможна только по безналичному расчету. При оформлении заказа, в примечании к заказу следует указать, что Вы хотите получить коммерческое предложение или счет на оплату. Он будет отправлен Вам отдельным письмом.

Оставить отзыв

У данного товара нет отзывов. Станьте первым, кто оставил отзыв об этом товаре!